The Easy Way to Remove Tile from Your Bathroom Floor and Walls

Updates Image

The Easy Way to Remove Tile from Your Bathroom Floor and Walls

5 Steps for Removing your old tile


Step 1. Rent a Small Dumpster

Tile evacuation is a muddled activity. On the off chance that you additionally plan on expelling restroom apparatuses as a major aspect of you rebuild, you'll end up with an excess of flotsam and jetsam for your trash administration to take at the check. In this way, before you get the opportunity to work, consider leasing a 10-yard dumpster to deal with the clean-up.


Step 2. Round Up Your Materials

Time to adapt up. You’ll require a couple of instruments and defensive wear to keep you working safely.

Tile Removal Tools:

Protective Gear:

  • Chisel
  • Pry Bar
  • Hammer
  • Shop-Vac
  • Utility Knife
  • Masking Tape
  • Plastic Sheeting
  • Reciprocating Saw
  • Boots
  • Face Mask
  • Work Gloves
  • Safety Goggles
  • Long Pants and Sleeves


Step 3. Prep the Bathroom

When the hammers begin swinging, you’re progressing to kick up a part of tidy and flotsam and jetsam, so take down glass shower doors to secure them from harm. On the off chance that you have got a shower window ornament, evacuate it from the room beside any window medicines so they won’t collect clean. Tape plastic sheeting over the entryway, vents and registers within the room to keep tidy from sifting into the rest of your house.


Important Safety Tip: If your bathroom was designed before 1978 and has paint on wall pieces, check the lead paint before you begin removing the tiles. When left undisturbed, lead is not very dangerous; but when chipped, dust can be extremely harmful — especially for young children.

  • Remove any baseboards in the room until you have the plastic up. If you plan on reinstalling them, here's how you can uninstall them without damage:
    1. Cut through the paint with a utility knife along the top, bottom, and sides of each board.
    2. Slide a putty knife around the door behind the baseboard below the molding, and pry gently out to remove the nails.
    3. Move the wall down, repeat this cycle every six inches or so until the whole board is safe.
    4. If the board is wedged between the surrounding molding, rock it up and down carefully to ease it out.
    5. Mark will board 's back with its position so you can put it all back in the correct spot.


Step 4. Tear Up Your Floor Tiles

  • Time to begin the demolition work. The simplest way to remove a tile floor is to start at the doorway where the floor of your bathroom meets the adjacent room or hallway, and work in. Mind to clean loose tile when you walk and you can have a smooth, safe area of work.

How to Remove a Tile Floor

  1. Using a hammer and chisel to smash one of the door side tiles.
  2. Work the chisel under the next stone, and use the hammer to free it.
  3. Continue this step until all of the flooring has been removed. If you're having a hard time loosening tiles first use your chisel to break the grout lines.

Important Safety Tip: Take a look at the adhesive layer underneath the first tile you pry up. Unless before 1984 the bathroom floor was built, and the adhesive is black and tar-like, it can contain asbestos. Stop your work and call in a professional tile remover who can handle asbestos safely. In the meantime, keep the room closed off so that no one disturbs the material.

Step 5. Take Down Your Wall Tiles


Time to switch from the space bottom upwards. The best way to remove tiles from wall is to start at the top and work down your way. Recall taking regular breaks to bring discarded tiles to your dumpster so they won't trip you up when you're working.

How to Remove Tile from Walls

  1. Break up a tile using a hammer and chisel at one of the room's top corners. Starting with one of the rounded tiles at the bottom of your shower makes it simpler.
  2. Function horizontally along the top of your starting wall, insert your chisel under each tile and use the hammer to loosely pop it up.
  3. Using reciprocating saw to cut through exposed drywall. Beware of not sinking the blade into the studs. When you are having a tough time, first remove another row or two of tile.
  4. Slide a pry bar into one of these holes and apply pressure to pry a tile and back section down.
  5. Continue round the room with this method to remove all tiles from the wall. Once you start prying make sure you still have a firm footing

What Comes After Tile Removal?

With your DIY tile removal job behind you, you will turn your bathroom into a blank slate that is a true oasis. And you've saved a nice piece of change to bring into your room plans.